Now in chastity - need info

The wife bought and has put me into a cb6000. The smallest ring I can't get out of is ring #3 with the second largest spacer and post. It's tight. Maybe too tight. The larger items move around in the device as I move and pinch the FUCK out of me. So, it was either this configuration or nothing. Naturally, she didn't want nothing so here I am. Anyway...question is...is there anything I can do to alleviate this constant tension feeling I have in my balls. The poor things are not pinched...I can just constantly feel it and it feels lightly tingling. I can't tell that there's a red flow issue because the sac itself is still a little loose. This could be just me getting used to it (only had 30 mins in it so far). Any other chaste boys out there with this experience and solution or insights?

Thanks.

Sorry that I can't give you any specific information about the CB-6000, but I can let you know what I have experienced with the CB-2000 and -3000.

I had the -2000 first and it was a total bitch trying to "dial it in". You can't just put it on and think you have it right. It is a matter of adjusting the rings and spacers and also adjusting to having the cage on. I had varying degress of comfort, but it seems that, invariably, the pinching would begin. I got tired of that, and it looked like the -3000 would be more comfortable, so I bought the tube for that one.

Well, with my modest(4" or so) endowment, I could not generally get past the bend of the -3000 and that wasn't too comfortable for me, either. I had sort of given up on them except for short-term wear. Then, my wife wanted me locked up one time so I decided to try again.

I went back and tried the -2000 and it has been great. For some reamister, it just works this time. Yes, there is the occasional pinch, or pull if you get some hair stuck in there, but I have had very comfortable periods of up to 3-weeks in it. The only trouble I have is that one of my balls will sometimes pull-through the rings and I will have to be unlocked to get it back in.

The bottom line is: patience. Don't rush things, let her know that you are working to get things right and before you know it, your cock will be in the CB for weeks at a time.

Good luck! If that is what you are looking for!

Thanks mate...you're right...this thing is a major bitch to get on at first and patience was VERY thin during the initial attemtps (plus the instructions the company gives you are crap). Once it's on, and the "gears" are tight, I don't get the skin pinching. My issue is this tightness feeling in my balls creates this wierd warm/cool/tingling sensation in them. It feel a bit of anxiety because I'm constantly aware of the feeling. I think that's me being constantly aware of this non-body part stuck to my body part. But, it could also be that the sensation is not supposed to be there and means I'm doing it wrong. That's what I'm trying to figure out the most. Is the feeling I have normal or not and if it's not, should I adjust to prevent a problem.

If you are in pain, you need to take it off. I hope that she is understanding enough to give you the keys until you adjust to it.

I know what you mean by the warm/cool thing. It never really bothered me, I just wrote it off to the ring kind of metering the red flow as I moved around. I never felt any numbness or tingling, so I just figured that I was adjusting to the foreign appendage. Like I said before, it is an adjustment period, and sooner or later you will probably get used to it.

One more thing. Once you get the rings and spacers right, you really will get used to it. Several times I have actually had to reach down to check on it to make sure it is still on. At first, relaxing with it on SUCKS, but that gets pretty second-nature too.

Stick with it, and give it some time. I thought I had some pics of me wearing the CB-2000, but I can't find them. Once I do, I will post them.

I have a CB-6000 as well and I would like to add to the general consensus that if you have any pain or numbness, you need to remove it and use a larger ring. I know what you mean by the tension in your sac. I have a tight sac and when I first started using mine, it felt like it was squashing my balls. As mentioned, after a day or two, you do get used to it and forget that you even have it on. My job requires quite a bit of physical activity (lifting, climbing ladders and tons of walking) and I found that the CB-6000 did not hinder any of this activity.
As lil_dick_cuck said, relaxing in it is probably the worst part. Especially if you are used to relaxing on your stomach as I am. If you can get past any issues relaxing with it, I think you will find it is any easy adjustment. The longest I have worn mine is 5 days. Not a marathon wearing, I know, but by the end of that period I was quite comfortable with the CB-6000.
As a side note, I love the fact that your wife was the one that purchased it for you. Be sure to thank her and let her know you are pleased she thought enough of you to hold your key...just make sure your fitting is right before the key holding starts.
Best of luck!

Some information that I have found about the CB-6000 for you.

The hyperlink is visible to registered members only!

Thanks guys! I'll check out that site for sure and I appreciate your insights. Despite the noticeable sensation in my balls, I don't feel pain. So, I haven't taken it off...that is...I hadn't until I discovered that I can pull my cock out of it while it's locked...quite easily actually. Any thoughts on that one?

With the -2000 and -3000 I have had instances where one of my testicles has gotten through the ring. Let me tell you, that is VERY uncomfortable.

The only thing to do at that point was to pull the other one through and take the whole thing off. I always called my wife, of course, but that proves that you can take it off if you want to.As for the pull-out, I definitely belive that that is possible, also.

The big thing here is that devices like this are not infallible. It is partly an honor system. You can get out, but you can't get back in if the thing is still locked. It isn't escape-proof, but is definitely escape-evident.

The pull-out is something that I know I can do but when I am locked up, decide not to. She can't put me in it unless I agree and since I agree, I give up the overt ability to play with my cock and the covert systems that I could use to defeat the cage. That is my opinion, but it is a method that keeps me from pulling out, picking the lock, defeating the plastic lock or using any other method of circumventing the CB. If you want to beat it, you can. If you do beat it, then she needs to get you a more secure device or this type of play may not be for you.

So. there are my (more than) 2-cents.

Everyone into chastity goes through this....it takes time to get the right fitting for you.....once you've done that you then need to condition your body to accept it....again this is individual took me about 3 months before i could go 24/7 properly...

Ultimately if you remain serious about chastity you'll need to go custom made steel....

I'm now in the ChastitySteel CS500 in the daytime and the Steelworxx Steelheart2 at night...she supervises the change over at morning and evening shower time....so i'd say i'm 23/7 not 24/7 we've found that this way, 2 washes and re greases a day eliminates totally any rash and chaffing issues....

Bottom line is it's different strokes for different folks, i consider my chastity to be permanent on the grounds that it's not within my control, some diehards would say that if it comes off daily for cleaning it's not 24/7 find whats best for you

Tony

Here is the only picture I can find of my little dick in the CB-2000.

as far as I'm concerned with chastity issues the best thing you might want to get is a PA piercing. that stands for Prince Albert and goes _through_ your uretra then protrudes at the lower end of the glans. lock that and you're done. no more chaffing and hygienic issues... I tried the 3000 to no avail (it's too small) and the Curve (too big) and I finally have had my PA done 3 days ago... now all I have to do is wait for it to cure and get my custom locking device done, and I'm set...
and you know what? it's about the same price as the plastic stupid cages.

how does it serve as chastity? what does it do to prevent erections, sex, cumming?

how does it serve? simple. I'm putting a small padlock through it and then attach it to a ring around the balls. I cannot remove the ring (locked with the same padlock) so ... go figure
a word of advice - don't try this before your piercing heals. I'm waiting for my healing too... have everything at hand but since the piercing is fresh I won't remove it for 30 days. (*anxiously waiting :D*)

Right, so if any of you read one of my other posts (no reamister why you should) you would know that I was able to come in my CB3000, so I changed to a CB2000 and its much better in terms of stopping me from coming.

The irony is that it makes quite a bulge in your jeans, I was locked up today and you would not believe the number of women who were checking out my crotch on the street!

Noone ever checks out my crotch normally

Interesting - I found that I couldn't make myself cum in the 6000 but I could cum close. My bigger issue however is that I can pull my cock out of the cage to jack off if I want to. I can get it back in but it's a bitch to do so. Balls, can't get them out...penis..I can. Because of that, the wife's lost interest in keeping me in chastity ;(

The easiest way from getting out of any of the Miller products is to get a PA piercing.

After it heals, you run a small cable through your PA ring back to where the lock is and lock it. Keptforher.com has cables.

This has a couple of advantages, first you don’t have to have such a tight A ring (less pain)
Then with the cable, your keyholder will know for sure that you are locked until properly unlocked.

Draclif69, can you not reduce the size of the spacers between the ring and the cage?

best regards, your partner in plastic, SBG

I'm using the smallest spacer but even then I can just lift it up a bit and still just loop my finger around the shaft and pull it out.

Sorry, lift what up? You pull up the cage, stick your finger in from underneath , loop it around your shaft and pull down and it comes out?

Well, you know how when the cage is on and you can move it up and down (pure vertical movement) because your body tissue gives a little? I mean, in my case, my skin, muscle and whatever else is there allows the cage to move on my body a bit. If I lift the whole cage up vertically, there's a gap that appears above my shaft and below the top inner part of the cage. If I hold it in that position and loop my finger under the shaft, I can easily pull the whole bad boy out. That's only if I'm not erect more than say 50%. Getting it back in is very difficult but not impossible and there's a bit of a trick to that too. I get it in a little bit, then I get myself as hard as I can in the cage and the cock goes in on it's own. Then when I'm fully flacid again, it's fully inside the cage.

Does that make sense?

I think so, I've used the 3000 and the 2000 but I've seen pictures of the 6000 and I imagine that getting in and out would be the same as the 3000.

So do you think if you had a smaller spacer, or no spacer at all you'd be secure?

Dracliffe, while I sympathise I think you probably are not going to a tight enough fitting. With the second smallest ring and smallest spacer I find it is quite secure BUT only after about 4-5 days. The reamister for this is my balls swell slightly over this time and pulling out could only be achieved with great pain. However you need to make sure that the circulation is still good and no sign of blueness. Hot cold is normal and pinching / chafing will occur while you are getting used to it (about 2 weeks before I would say I was not thinking about it ALL the time and it is worse in terms of pulling with hair). With a good fitting you still might be able to get out with perserverance or by accident (balls popping out is very painful) but if you can get back in without being unlocked then it is definitely too loose. The bottom line is if your Mistress decides you should be in chastity, why should you be comfortable if it is not doing you harm?

With regard to comments on other devices. I have tried both metal chastities (Tollyboy) and a Prince Albert. The Tollyboy was very secure but not very practical regarding airports etc and eventually I just put on too much weight for it to be used (non adjustable). My experience with the Prince Albert was disasterous. It is probably just me but although I let it heal for 3 monhts before being locked up and then it tore the skin in both the penis and the perineum over time through trying to get erect. The perineum has healed but the other tear has been permanent. So despite what others may say I would say that a CB3000 / 6000 is a good compromise that is fairly secure if fitted correctly. For the record I have just moved to a CB6000 after years in a CB3000. Apart from the fact that I can no longer complain about possible airport security alarms (the 6000 with plastic lock has no metal parts) the only real differences are that the 6000 is more fiddly to put on but actually seems to have a slimmer profile making it almost invisible in normal clothes.

Dracliffe, while I sympathise I think you probably are not going to a tight enough fitting. With the second smallest ring and smallest spacer I find it is quite secure BUT only after about 4-5 days. The reamister for this is my balls swell slightly over this time and pulling out could only be achieved with great pain. However you need to make sure that the circulation is still good and no sign of blueness. Hot cold is normal and pinching / chafing will occur while you are getting used to it (about 2 weeks before I would say I was not thinking about it ALL the time and it is worse in terms of pulling with hair). With a good fitting you still might be able to get out with perserverance or by accident (balls popping out is very painful) but if you can get back in without being unlocked then it is definitely too loose. The bottom line is if your Mistress decides you should be in chastity, why should you be comfortable if it is not doing you harm?

With regard to comments on other devices. I have tried both metal chastities (Tollyboy) and a Prince Albert. The Tollyboy was very secure but not very practical regarding airports etc and eventually I just put on too much weight for it to be used (non adjustable). My experience with the Prince Albert was disasterous. It is probably just me but although I let it heal for 3 monhts before being locked up and then it tore the skin in both the penis and the perineum over time through trying to get erect. The perineum has healed but the other tear has been permanent. So despite what others may say I would say that a CB3000 / 6000 is a good compromise that is fairly secure if fitted correctly. For the record I have just moved to a CB6000 after years in a CB3000. Apart from the fact that I can no longer complain about possible airport security alarms (the 6000 with plastic lock has no metal parts) the only real differences are that the 6000 is more fiddly to put on but actually seems to have a slimmer profile making it almost invisible in normal clothes.

Ya, I've had basically the same experiences in terms of difficulty putting on the 6000...can be very frustrating and hurty. I use the smallest spacer and the middle ring. The smaller ring is just too small to fit around my balls. I just cannot get it high enough to put the upper first pice on it. I'll try again tomorrow with some serious oil but I doubt I'll have success.

Thanks cucks!

i am since years in a NEOSTEEL hip belt and it is fantastic chastity-belt. i am permanent locked only opened once or twice a week for cleaning purpose ..recently i changed the frontshild to the new MASTERPIECE system ,it is outstanding . check for pictures some of my postings .. reg.. andrea
Stay locked in a NEOSTEEL MASTERPIECE "ARCH" at all times!

I can't do that belt I'm afraid - I travel through airports too frequently during the week.